Real-Time Portable Explosion-Proof Multi-Gas Detector for Industrial Gas Meter

• Customization: Available
• After-sales Service: Whole Life Technical Support
• Warranty: One Year
• Model NO.: MG41-1-EX
• Product Name: Gas Detector
• Printer: Bluetooth
• Detection of Gas: Oxygen, Hydrogen Sulfide, Carbon Monoxide and Comb
• Response Time: Diffuse≤ 60s
• Working Temperature: Temperature -10 ºC -50 ºC; Humidity <95%
• Operating Vol: DC3.7V (3000mAh Lithium Battery Capacity)
• Explosion-Proof Mark: Ex Ib Iib T3 GB
• Protection Class: IP65
• Charging Time: 6h-8h
• Transport Package: Wooden Case
• Specification: 69*28*145mm
• Trademark: J&X
• Origin: China
• HS Code: 902710090
• Production Capacity: 300pieces/Month

Product Description

                            Real-Time  Portable Explosion-Proof  Multi-Gas detector for Industrial

Product Description

    
   Gas detector is a portable gas analyzer that can measure four gases at the same time. It is generally used to detect oxygen, hydrogen sulfide, carbon monoxide and combustible gases. This multi gas detector shell is made of high-strength engineering plastics and composite non-slip rubber, with high strength and good hand feeling. It waterproof, dustproof, and explosion-proof.
   Our gas analyzer can store up to 130,000 test data and can view historical data at any time with the software. This wireless gas detector is simple to use and easy to maintain, meeting the requirements of industrial safety for testing equipment.
 

Product Parameters

 

Parameters -  gas detector

 

Gas leak detector detection	CO	H2S	Ex	O2
Range	0-1000 ppm	0-100ppm	0-100% LEL	0-30.0% VOL
Checking content	75/300/700 ppm	20/50 / 80ppm	10% / 40% / 60% LEL	5% / 15% / 25% VOL
Reading error	Absolute error: ± 5ppm	± 5 ppm	± 5% FS	± 3% FS
	Relative error: ± 10%
Duplicate value for money	≤ 2%	≤ 2%	≤ 2%	≤ 1%
Zero drift	± 3ppm	± 5ppm	± 2% FS	± 1%
Duration drift	± 5%	± 5ppm	± 3% FS	± 1%
Alarm values	50 / 150ppm	10 / 35ppm	20/50% LEL	19.5 / 23.5% VOL
Response time	Diffuse≤ 60s
Signaling device type	Low and high alarm, multiple gas alarm, touch alarm, low battery alarm, fast tone, automatic shutdown alarm
Working temperature	Temperature -10 ºC -50 ºC; Humidity <95% RH non-condensing
Operating Vol	DC3.7V (3000mAh lithium battery capacity)
Explosion-proof mark	Ex ib IIB T3 Gb
Protection class	IP65
Backlight	Automatically turns on when working in low light or when an alarm sounds, or the button is tied down.
Charging time	6h-8h
Standby time:	More than 8h continuous

 

Product Features

1. The MG41-1-EX gas detector shell has high strength and belongs to an intrinsically safe explosion-proof product.
2. High-definition color screen design, easy to check the gas status.
3. High and low limit alarm values can be set.
4. Full-featured self-test, the RS-MG41-1-EX adopts three-alarm functions of sound, light, and vibration.
5. Shortcut keys to quickly turn on and off the sound alarm and storage mode.
6. Large-capacity battery, the device can be used continuously for at least 8 hours in the always-on mode

 

MG41-1-EX is a portable multi gas detector developed  for explosive or toxic environments. The working principle of this gas detector is to detect gas by natural diffusion, and it has built-in electrochemical and combustion gas sensors, which have excellent sensitivity and excellent repeatability. It can detect four kinds of gases: oxygen, combustible gas, carbon monoxide, and hydrogen sulfide

 

 

 

FAQ

1.What do 4 gas monitors detect?
The 4 gas monitor can simultaneously detect the concentration of combustible gas-%LEL, oxygen-O2, carbon monoxide-CO, and hydrogen sulfide-H2S. It is the most widely used personal gas monitor. It can be found in industrial, mineral, medical, or confined space workers around the world.

2.What is gas detector calibration?
Gas detector calibration is a requirement for all gas sensors. This is the act of exposing the sensor to a target gas of a specific concentration and then adjusting the detector to correctly read the gas concentration. When the target gas is not in the air, many sensors also need to use zero gas to adjust the voltage being output. This process needs to be operated by professional technicians

3.How does a multi gas detector work?
The gas enters the inside of the device through natural diffusion, is detected by the built-in gas sensor module, and converts the value into an electrical signal for output.

4.Where to download this 4 gas detector manual?
To protect the patented technical parameters, please contact us for a manual.

5. What should I do if some parts are broken?
Dear customer, please don't worry. Our products come with a 12-month warranty (excluding wear parts). After the warranty period, you can still purchase replacement parts from us.

6. Can you provide OEM/ODM services?Yes, we offer product customization services to meet your specific needs.
If you have additional questions, feel free to contact us!