Highly Corrosive Gas Filters

• Customization: Available
• Interface Size: 8mm, 6mm, 1/4, 1/8 and Other Caliber Sizes
• How to Use: Connect The Air Nozzle of This Produc
• Model NO.: JX-HCGF
• Transport Package: Wooden Case
• Specification: 38mm, 160mm, 220mm
• Trademark: J&X
• Origin: China
• HS Code: 9027100090
• Production Capacity: 300pieces/Month

Product Description

Highly corrosive gas filters

Brief description: 
Different materials have different functions. For example, color-changing silica gel can effectively absorb water molecules in the air, filter dust impurities in the air, and effectively filter moisture, dust impurities in the output gas of the air pump (air compressor), ensuring that the input gas is dry and clean, ensuring the purity and dryness of the gas source, and extending the service life of the equipment.

Product texture:  
 304 stainless steel, PTFE gasket, the pipe is BA sanitary grade, polished inside and outside, can be used at temperatures within 250 degrees,can withstand high temperature and high pressure, and can be steam sterilized!

Specifications:
The tube diameter is 38MM, and the length is available in sizes such as 160MM and 220MM. Please consult if you need other specifications!

Interface size: 
The interface sizes are available in 8MM, 6MM, 1/4, 1/8 and other caliber sizes. The connector is a stainless steel connector, high-quality and durable!

Installation instructions: 
Both ends of the drying tube can be freely disassembled, which is convenient for installation and maintenance; it is recommended to install it on gas equipment that is easy to observe and disassemble;

How to use: 
Connect the air nozzle of this product to the output port of the air pump (compressor).

Maintenance: 
Both ends of this product can be disassembled, which is more convenient for maintenance. For example, when filled with color-changing silica gel desiccant, the color of the internal silica gel particles is dark blue when not in use. After a period of use, the silica gel particles gradually turn light blue after absorbing moisture. During use, as the humidity of the air increases, the internal particles gradually turn red after absorbing water molecules. When it turns pink or translucent red , it means that the silica gel particles have reached a saturated state of moisture absorption. At this time, new silica gel particles should be replaced or the internal silica gel particles should be taken out and dried before reinstalling. 
In addition, this product can also be filled with other fillers such as molecular sieves and deoxidizers! Depending on the specific usage, most fillers such as silica gel, molecular sieves, deoxidizers, etc. can be recycled and reused, with high cost performance!