PCT-100 VOCs Gas Analyzer
Brief description:
Model PCT-100 VOCs Gas Analyzer Discharge port:In order to adapt to the increasingly stringent emission standards and test the basic effect of
factory exhaust treatment to ensure production safety, enterprises need to test the content of VOCS gas at the main pipe or discharge port
before the exhaust gas enters the RTO.
Conventional practice:
1.Use PID photoionization principle: the characteristic is that the range is too narrow (0-10000PPm), the data is accurate; but when encountering high-concentration components, it is easy to over-range and damage the sensor components, and the maintenance and replacement costs are too high.
2. Use FID flame combustion principle: the characteristics are fast detection response speed, accurate data, wide measuring range, and wide adaptability to gases; but the purchase and maintenance costs are high, it cannot perform continuous online detection, is easy to damage, and is not suitable for random inspection conditions.
3. Use the infrared principle: the characteristics are fast detection response speed, accurate data, wide range (0-50000PPm), the sensor is not easy to damage, and the maintenance cost is low; but when encountering special gas components, it is necessary to verify in advance whether it can be measured.
In view of the above situation,our company recommends the use of infrared principle and German high-quality sensor Dynament/SST, which can control the accuracy at the PPm level; adopts pre-sampling pretreatment (electric pump + dust and tar removal + water removal + constant flow + venting) + on-site numerical display, quickly responds to the total amount of VOCS in the pipeline, and can extend the service life of the system to 3-5 years; data can also be transmitted to DCS/PLC/GDS through4-20mA according to production needs to achieve overall automated control.
Application Areas:
Exhaust pipes and exhaust outlets;
Technical Parameters:
Model: MST-PCT-100
Detection gas: Volatile VOCs
Measuring range: 0~50000PPm (range can be customized) Detection principle: infrared 12
Detection accuracy: 0.01%VOL Explosion-proof level: ExdibIICT6Gb protection, etc.
Features:
1.Customized pretreatment: dehydration, cooling, drying, voltage stabilization, constant flow, etc. of sample gas;
2.Applicable explosion-proof areas: Intrinsically safe explosion-proof composite instrument, suitable for harsh use areas;
3.Safety: If the concentration value exceeds the first-level preset alarm value, an on-site alarm prompt will be given; if the concentration value exceeds the second-level preset alarm value, automatic interlocking control can be performed as needed;
4.Module platform: The pre-processing level and function can be freely adjusted according to the actual usage, with a wider range of
adaptability;
5.Easy maintenance: one-button calibration/calibration, tool-free disassembly and maintenance, hot-swap replacement of sensor components;
6.Intelligent display: the range can be freely switched between PPm-VOL, and the display is more accurate;
Technical parameters:
| Response time |
T90<30S |
| Signal output |
4-20mA, RS485, HART protocol Switch output:4 groups (2 groups for use and 2 groups for standby) Rated voltage:DC24 |
| Signal acquisition |
16-bit ADC digital-to-analog conversion Ambient temperature |
| Ambient temperature |
-10ºC~40ºC |
| Display mode |
OLED |
| Range switching |
PPm-VOL free conversion Pretreatment level |
| customized pretreatment Main body material |
304/PTFE |
| Box material |
304 stainless steel wire drawing |
| Appearance size |
770*650*250mm |
| Other functions |
anti-interference, anti-isolation, anti-lightning, tool-free disassembly and maintenance, one-key calibration, hot-swappable sensor replacement, 24V anti- |
Audited Supplier 
){kind=link}