Vocs Tail Gas Analyzer

• Customization: Available
• After-sales Service: Whole Life Technical Support
• Warranty: One Year
• Model NO.: XMB-PCT-100
• Brand: J&X
• Customized: Customized
• Portable: Non Portable
• Type: Vocs Tail Gas Analyzer
• Detection Gas: Volatile Vocs
• Measurement Range: 0~50000ppm (Range Can Be Customized)
• Detection Principle: Infrared 12
• Detection Accuracy: 0.01%Vol
• Explosion-Proof Level: Exdibiict6GB Protection, etc.
• Response Time: T90<30s
• Signal Output: 4-20mA,RS485, Hart Protocol Switch Output 4 Groups
• Rated Voltage: DC24V
• Acquisition: 16-Bit ADC
• Display Mode: OLED
• Range Switching: Ppm-Vol
• Free Conversion Preprocessing Level: Customized Preprocessing
• Main Body Material: 304/PTFE
• Box Materia: 304 Stainless Steel Wire Drawing
• Appearance Size: 770*650*250mm
• Transport Package: Wooden Case
• Specification: 770*650*250mm
• Trademark: J&X
• Origin: China
• HS Code: 9027100090
• Production Capacity: 300pieces/Month

Product Description

 

VOCs tail gas analyzer

VOCs tail gas analyzer discharge port: In order to adapt to the increasingly stringent emission standards and test the basic effect of factory tail gas treatment to ensure production safety; enterprises need to detect the content of VOCS gas at the main pipe or discharge port before the tail gas enters RTO.

VOCs tail gas analyzer discharge port: In order to adapt to the increasingly stringent emission standards and test the basic effect of factory tail gas treatment to ensure production safety; enterprises need to detect the content of VOCS gas at the main pipe or discharge port before the tail gas enters RTO.

Product features:
1. Customized pretreatment: dehydration, cooling, drying, voltage stabilization, constant current, etc. of sample gas.
2. Applicable explosion-proof areas: intrinsically safe explosion-proof composite instrument, meeting the requirements of strict use areas.
3. Safety: when the concentration value exceeds the first-level preset alarm value, there will be an on-site alarm prompt; when the concentration value exceeds the second-level preset alarm value, it can be automatically interlocked as needed.
4. Module platform: the number of pretreatment levels and functions can be freely adjusted according to actual use conditions, and the adaptability range is wider.
5. Easy maintenance: one-button calibration/calibration, tool-free disassembly and maintenance, hot-swap replacement of sensor components.
6. Intelligent display: free switching of range PPm-VOL, display.

Conventional practices:
1.Use PID photoionization principle: the characteristic is that the range is too narrow (0-10000PPm) and the data is accurate; but when encountering high-concentration components, it is easy to over-range and damage the sensor components, and the maintenance and replacement costs are too high.
2. Use FID flame combustion principle: the characteristics are fast detection response speed, data, wide range, and wide gas adaptability; but the purchase and maintenance costs are high, it cannot be continuously tested online, it is easy to be damaged, and it is not suitable for random inspection conditions.
3. Use infrared principle: the characteristics are fast detection response speed, accurate data, wide range (0-50000PPm), the sensor is not easy to be damaged, and the maintenance cost is low; but when encountering special gas components, it is necessary to verify in advance whether it can be measured. ·In view of the above situation, Maanshan Xinmaibo Technology Co., Ltd. recommends the use of infrared principle and the use of German high-quality sensor Dynament/SST, which can control the accuracy at the PPm level; adopt pre-stage sampling pretreatment (electric pump + dust tar removal + water removal + constant flow + venting) + on-site numerical display, quickly respond to the total amount of VOCS in the pipeline, and extend the service life of the system to 3-5 years; data can also be transmitted to DCS/PLC/GDS through 4-20mA according to production needs to achieve overall automatic control.

Technical parameters:

Model	XMB-PCT-100
Detection gas	Volatile VOCs
Measurement range	0~50000PPm (range can be customized)
Detection principle	infrared 12
Detection accuracy	0.01%VOL
Explosion-proof level	ExdibIICT6Gb protection, etc.
Response time	T90<30S
Signal output	4-20mA,RS485, HART protocol Switch output: 4 groups (2 groups for use and 2 groups for standby)
Rated voltage	DC24V
Acquisition	16-bit ADC
Ambient temperature for digital-to-analog conversion	-10ºC~40ºC
Display mode	OLED
Range switching	PPm-VOL
Free conversion preprocessing level	customized preprocessing
Main body material	304/PTFE
Box material	304 stainless steel wire drawing
Appearance size	770*650*250mm
Other functions	anti-interference, anti-isolation, anti-lightning, tool-free disassembly and maintenance, one-button calibration/calibration, hot-swappable sensor replacement, 24V anti-