About- Industrial water ph sensor
The industrial water PH sensor is a device for measuring the pH value (hydrogen ion concentration index, pH) of a solution. With automatic temperature compensation function. It is suitable for industrial sewage, domestic sewage, agriculture, aquaculture, and other scenarios in a non-corrosive weak acid and weak alkali environment. The output signal has rs485, 4-20ma, 0-5V, 0-10V.
industrial pH sensor adopts conventional composite electrode, which is suitable for the measurement of conventional sewage, tap water, environmental sewage, domestic sewage and other solutions. The pH measure range is between 0~14pH, and the resolution is 0.01pH. The adaptation temperature of the electrode is 0-80ºC. This water pH sensor consists of two parts: a data collector and an electrode probe. The ph electrode probe has four lengths of 5m, 10m, 15m, and 20m. The housing of the data collector is IP65 protection grade, which can be used in outdoor rain and snow environmen
Power supply: DC 10~30V
Power consumption: 0.6W (rs485), 1.2W (4~20mA/0~5V/0~10V)
Output signal: RS485/4~20mA/0~5V/0~10V
pH measurement range: 0~14.00pH
Resolution: 0.01pH
pH measurement error: ±0.15pH
Repeatability error: ±0.02pH
Temperature measurement range: 0~80ºC
Resolution: 0.1°C (set temperature for manual temperature compensation, default 25°C)
Temperature measurement error: ±0.5ºC
Working environment: 0-60ºC, relative humidity <85%
Applicable temperature of electrode: 0~80ºC
Electrode wire length: default 5m (10m, 15m, 20m can be customized)
Electrode life cycle: 1 year
High performance: high accuracy, fast response, good repeatability
Universal protocol: MODBUS RS-485 or 4~20mA current
Wide-range power supply: 10V ~ 30VDC
Robustness: suitable to be immersed in water for a long time
Maintainance-Free: advanced junction design, no clogging
Durable: anti-corrosion, automatic temperature compensation
User-friendly: Easy to install and integrate
Installation Instructions
1.Submerged type: the lead of the pH electrode is threaded out of the stainless steel tube, and the 3/4 thread on the top of the pH electrode is connected to the stainless steel 3/4 thread with a raw material tape. Make sure that no water enters the top of the electrode and the electrode wire.
2. Sidewall: The manufacturer provides a 316L all-stainless steel sheath with a bevel, and the pH electrode can be screwed into the sheath.
3. Duct mount: Connect to the pipe through the 3/4 thread of the pH electrode.